Honeywell 050025.17 Mounting And Connection Instructions page 2

Mounting and Connection Instructions
Distributor 16pole s.m.
Soldering distributor
Item no. 050025.17
General
Surface mounted soldering distributor for
connections. With 16 soldering fittings with 2
tongues and a cover contact (NO-contact).
Technical data
Connection technology
Protection class as per VdS:
Housing:
Colour: Traffic white (similar to RAL 9016)
Dimensions ( W x H x D
Installation notes
When switching the soldering base points please
take care that the connection between soldering
base point and core is save and clean.
Before closing the housing, secure the cable with
a cable tie or at the provided pull relief clamp.
Please observe when installing and closing the
cover of the housing, that the tamper contact will
switch correct and accurate.
Honeywell Security Group
Novar GmbH
Johannes-Mauthe-Str. 14
D-72458 Albstadt
: solder/solder
II
Plastic
): 70 x 84 x 20 mm
After the final mounting the cover screws must be
locked with screw sealings. Clean the seal (free
from grease) and cover with the label (VdS
imprint).
After attaching the plastic seal, the housing
cannot be opend without destroying the seal.
Connecting-List
1
2
3
4
5
6
7
8
CC
Connection diagram
3
2
1
Tamper
group
9
10
11
12
Subject to change Subject to change
without notice without notice
9
10
11
12
13
14
15
16
CC
4
5
6
7
8
Cover contact
(NO-contact)
30V DC/
100mA max.
16
15
14
13