Table of Contents
Advertisement
To print a label created using the transferred template, refer to "Using the Data
Transferred to the P-touch Labeling System" on page 38.
1
Press the File key.
2
Select "Print" using the
The file number of a stored label is displayed.
The label text is also displayed to identify the label.
3
Select a file number using the
• Printing a single page:
A single page is printed immediately.
• Printing a range of pages:
The screen you can specify the range is displayed. Select "All" or "Range" by using
the
or
key, and then press the OK or Enter key.
If you select "Range", specify the first page and the last page.
• Press the Esc key to return to the previous step.
• The message "No Text!" is displayed when you try to print a file with no text.
• When the message "Press Print to Cut Tape and Continue" is displayed, press the
Print key. To set whether the tape is cut after each label is printed, use "Cut Option".
For details, refer to "Tape Cutting Options" on page 13.
To delete a label using the transferred template, refer to "Deleting the Transferred Data"
on page 44.
1
Press the File key.
2
Select "Delete" using the
The file number of a stored label is displayed.
The label text is also displayed to identify the label.
3
Select a file number using the
The message "Delete?" is displayed.
4
Press the OK or Enter key to delete the file.
Press the Esc key to cancel deleting the file and return to the previous screen.
Printing a Stored Label File
or
key, and then press the OK or Enter key.
or
key, and then press the Print, OK or Enter key.
Deleting a Stored Label File
or
key and press the OK or Enter key.
or
key, and then press the OK or Enter key.
Printing a Stored Label File
1
2
3
4
5
6
7
8
9
19
Advertisement
Table of Contents
