NEC Univerge SV9100 User Manual page 31

1.
(9) Answer
When the LED on this key is flashing, press the key to
answer a waiting call.
(10) Mic
Press the key to Mute/Un-Mute the speaker and/or
handset. LED on this key lights to show the key is
activated.
(11) Up/Down
Press ( ) Down or ( ) UP key while idle.
• Speaker/Receiver Volume:
Press ( ) or ( ) key during conversation.
• Ringer Volume:
Press ( ) or ( ) key during ringing.
(12) Speaker
Controls the built-in speaker which can be used for
Hands Free dialing/monitoring. The LED on the key
lights when the key is active.
DT310 supports half duplex, handsfree.
(13) Transfer
Allows the station user to transfer established calls to
another station, without attendant assistance.
(14)Hold
Press this key to place an internal or external call on
hold.
(15) Contacts
Similar to the Contacts, Call Logs is an added
functionality of the Android OS.
(16) Dialer
When Dialer is selected, if the user is online, the
UT880 can dial out by following the process similar to
the Dterm.
(17) Call Log Call history image
Allows the user to review a history of all incoming and
outgoing calls.
(18) UC Suite UC Suite Login image
These keys can be programmed for direct access to
the UC Suite solution. Refer to the SV9100 UC Suite
Manual.
(19) More
When pressed allows access to the Account
information.
(20) Notification Bar
The UT880 NMLT App Status is a drop down status
notification providing quick viewing of the application
status including "online" or "offline" state, Call
information during active call, and voicemail indication,
if there is a pending message. Typically, the area is
hidden and the user can select it by clicking on the
"NEC UT880 NMLT" button on the top left hand corner.
25