Advertisement
9-Daily use
9-1
9-2
9-3
9-4
9-5
9-6
Tips:
Separate white clothes from coloured ones.
Bed linen and pillowcases should be buttoned, so that small parts cannot stuck inside.
Close zippers and hooks, and tie loose belts without metal parts, apron strings etc.
together.
Remove loose metal parts of clothes before putting into dryer such as metal
buttons.
Do not over-dry easy-care linen. Risk of creases. Allow fi nal drying in open air.
Clothes like knitwear can be over-drying sometimes. Ironing dry level are always
recommended to choose
For pre-dried, multi-layered garments or for fi nal drying the time-programme
(TIMER ) should be chosen.
18
9.1 Prepare the appliance
1. Connect the appliance to a power supply (220V
to 240V~/50Hz) (Fig. 9-1) Please also refer to sec-
tion INSTALLATION.
2. Make sure:
the water tank is empty and properly installed.
(Fig. 9-2).
the lint filter is clean and properly installed. (Fig.
9-3).
the condenser filter is clean and properly
installed (Fig. 9-4).
9.2 Prepare the laundry
Sort clothes according to fabric
(cotton,synthetics, wool etc.).
Only dry clothes that has been spun.
Empty pockets of all sharp or fl ammable objects
such as keys, lighters and matches. Remove
hard decorative objects such as brooches.
Zippers up and make sure the buttons are sewn
on tightly and place small items such as socks,
bras etc. in a wash bag.
Unfold bulky items of fabric such as bed sheets,
table cloth etc.
Follow the instructions on the laundry label and
dry those garments that can be dried by machine.
"
"
EN
Advertisement
