Step by step instructions
Once the Bosch boiler has been
installed, the remaining external
casing assembly can now be
completed.
Slot in the left hand side wall
panel to the rear bracket hooks
as shown.
6
Slot in the right hand side wall
panel to the rear bracket hooks
as shown.
Slide in the bottom panel by
guiding the bottom lip into to
internal lip of the side pall panels
(for both left and right hand side)
Sleeve the top panel over the
side wall panels and the rear
casing bracket.
Sleeve the front panel up inside
7
the top panel and push into
the side walls.
Ensure you click the bottom into
the base panel as detailed below
(1.1)
Once the external casing is
complete. Sleeve the rubber
seal over the ventilation pipe.
8
Part no. 8736200348
Bosch 8300iW External Boiler Casing Installation Instructions
Installation Instructions I 7