5� Daisy-Chain Function - Philips 24B1U5301H User Manual

5. Daisy-chain function
DisplayPort Multi-Stream feature
enables multiple monitor connections.
This Philips display is equipped with
DisplayPort interface and DisplayPort
over USBC1 which enables daisy-
chaining to multiple displays.
Now you can daisy chain and use
multiple monitors via a single cable from
one display to the next.
To daisy-chain monitors, first to check
below:
Make sure the GPU on your PC support
DisplayPort MST (Multi-stream
transport).
Note
• The maximum number of
connectible monitors may vary
depending on GPU performance.
• Please check with your graphic card
vendor and always update your
graphic card driver.
DisplayPort multi-streaming over
DisplayPort
PC
DP IN
Display Resolution Maximum number of external
monitors that can be supported
Extend mode (DisplayPort)
1920 x 1080 @60Hz 2
DP OUT DP IN
DisplayPort multi-streaming over
USBC1
PC
Display Link Rate
Resolution
1920 x 1080 HBR2
@60Hz
HBR3
Note
1. To check link rate: press
select Setup > information. The
screen will show HBR3, otherwise,
the link rate is HBR2.
2. We recommend to set USB Setting to
USB 3.2, press
Settings > USB, then select USB 3.2
which supports the LAN speed to 1G.
3. Depends on the graphic card
capability, you may connect
maximum 3 external monitors.
To select one of DP Out Multi-stream
modes:
Press button, select Setup > DP Out
Multi-stream > Extend.
Setup
23
USBC1 DP OUT
*1 USB Maximum number
Settings *2 of external
monitors that can
be supported
USB 2.0 2 *3
USB 3.2
1
USB 2.0
2
USB 3.2
2
button,
button, select USB
Clone
Power LED
Resolution Noti�cation Extend
DP Out Multi-Stream
Smart Power
Reset
Information
DP IN