Sony Handycam HDR-SR1 User Manual page 11

To use still images in a "Memory Stick Duo", select [
When you select [
The first time you connect your camcorder to a computer and select [
time until the computer recognizes your camcorder. When the computer recognizes your camcorder,
the connection is completed and [HDD Handycam Utility] window is displayed automatically.
Note
Depending on the status of the computer, a window that urges you to restart the computer may be displayed. In this case,
follow the instructions on the screen to restart the computer.
Recommended USB cable connection
Connect your camcorder as shown in the following illustration.
Connect the USB cable from your camcorder to the USB port on the computer and make sure no
other USB devices are connected.
If your computer has a USB keyboard and a USB mouse as standard equipment, leave them
connected and connect the camcorder to an available USB jack with the USB cable.
Notes
Operation is not guaranteed if you connect multiple USB devices to the computer.
Operation is not guaranteed if you connect the USB cable to the USB port on a keyboard or USB hub.
Make sure to connect the cable to the USB port on the computer.
Operation is not guaranteed on all the system requirement.
To disconnect the USB cable
1 Click the [Unplug or eject hardware] icon on the task tray.
2 Click [Safely remove USB Mass Storage Device].
3 Click [OK].
4 Touch [END] on the [
5 Touch [YES] on the LCD screen of your camcorder.
6 Disconnect the USB cable from the computer.
COMPUTER]
COMPUTER] or [ COMPUTER] screen on the LCD screen of your camcorder.
COMPUTER].
COMPUTER], it takes some