Base Settings; Eco Mode; Eco Plus; Auto Pre X - Motorola T101 Instructions Manual

8. Base settings

8.1

ECO mode

Your T1 o ers ECO mode function which reduces the transmitted power and energy
consumption when switched on.
To switch Eco mode on:
m
1. Press , scroll
2. The display shows
u d
3. Press or to select
m
4. Press to con rm or
NOTE
When ECO mode is set to ON, the handset range will be reduced.
8.2

ECO PLUS

When ECO PLUS is activated and the unit has been idle for 1 minute the transmitted
power between the handset and the base will stop, an incoming call or pressing any key
will activate the unit and it will revert back to the normal mode, until it has been idle again
for 1 minute. This feature is set to OFF by default.
To switch ECO PLUS on:
m
1. Press , scroll
d
2. Scroll to ECO PLUS
u d
3. Press or to select
m
4. Press to con rm or
8.3 Auto Prefix
You can set the phone to detect a dialling number and replace it with another number. The
number to be detected can be up to 5 digits long. It can be replaced with a number up to
10 digits long.
m
1. Press , scroll
d
2. Scroll to AUTO
3. DIGIT DETECT is displayed. Press
4. Enter the number you want to be detected and press
5. The display shows
6. Enter the number you want it replaced with.
m
7. Press to con rm or
26
d
to ADVANCED SET
ECO MODE and press
ON or OFF.
P
to return to the previous menu.
d
to ADVANCED SET
m
and press
ON or OFF.
P
to return to the previous menu.
d
to ADVANCED SET
m
PREFIX, press .
m
m
PREFIX and press
e
to return to standby.
m
and press .
m
.
m
and press .
.
m
and press .
.
m
.
.
Base settings