Table of Contents
Advertisement
3.3 Switching on
1. Connect the mains plug to the power
socket.
2. Press the ON/OFF if the display is
off.
The alarm buzzer could operate after
few seconds.
To reset the alarm refer to "High
temperature alarm".
If DEMO appears on the display, the
appliance is in demonstration mode.
Refer to "Troubleshooting" chapter.
The temperature indicators show the set
default temperature.
To select a different set
temperature refer to
"Temperature regulation".
3.4 Switching off
Press ON/OFF for 3 seconds.
The display switches off.
To disconnect the appliance
from the power disconnect
the mains plug from the
power socket.
3.5 Temperature regulation
The set temperature of the freezer may
be adjusted by pressing the temperature
button.
Default temperature:
• -18°C for the freezer
The temperature indicator shows the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
3.6 Ice maker function
The ice maker is switched on at delivery
and starts up automatically when the
appliance is connected to water and
power supplies.
To switch on and off the function press
the ice maker ON/OFF for 3 seconds.
The ice maker icon is shown when the ice
maker is activated.
The ice maker icon is
flashing when the ice
container is out of position.
For further details please
refer to "Troubleshooting"
chapter.
3.7 ChildLock function
To lock any possible operation through
the buttons select the ChildLock
function.
1. To switch on the function press
ChildLock for 3 seconds.
The ChildLock indicator is shown.
2. To switch off the function press
ChildLock for 3 seconds.
The ChildLock indicator goes off.
3.8 FROSTMATIC function
Press the Mode button until the
FROSTMATIC icon appears.
This function stops automatically after 52
hours. To switch off the function before
its automatic end, press the Mode
button in order to select another
function or press the Mode button until
you can see none of the special icons.
The function switches off by
selecting a different freezer
set temperature.
3.9 Minute Minder function
The Minute Minder function is to be used
to set an acoustic alarm at the preferred
time, useful for example when a recipe
requires to cool down a mixture for a
certain period of time, or when a
reminder is needed in order not to forget
bottles placed in the freezer for fast
cooling.
1. Press the Minute Minder button.
The Minute Minder indicator appears.
The Timer shows the set value (30
minutes).
2. Press the Temperature button to
change the Timer set value from 1 to
90 minutes.
The Timer indicator is shown (min).
At the end of the countdown the Minute
Minder indicator flashes and an audible
ENGLISH
7
Advertisement
Table of Contents
