Related Manuals for Samsung DIR-640LA1
Summary of Contents for Samsung DIR-640LA1
- Page 1 Version 1.0 | 09/03/2012 User Manual Wireless N300 Cloud VPN Router DIR-640LA1 DIR-640L...
-
Page 2: Preface
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description September 03, 2012 • Initial release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. -
Page 3: Table Of Contents
Table of Contents Table of Contents Preface.................. i Router Settings ..............21 Manual Revisions ................i DHCP Server Settings ............22 Trademarks ..................i VPN Settings .................23 IPSec Settings ...............24 Product.Overview............... 1 L2TP Settings ................26 Package Contents ................. 1 Advanced Network Settings ...........27 System Requirements .............. - Page 4 Table of Contents Wireless Modes ................48 Networking.Basics............49 Check your IP address ...............49 Statically Assign an IP address ..........50 Technical.Specifications...........51 GPL.Code.Statement............52 Safety.Statements............65 D-Link DIR-640L User Manual...
-
Page 5: Product.overview
Section 1 - Product Overview Product Overview Package Contents DIR-640L Wireless N300 Cloud VPN Router Ethernet Cable Two Detachable Antennas Power Adapter Optional Wall-Mount Kit If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-640L will cause damage and void the warranty for this product. -
Page 6: System Requirements
Section 1 - Product Overview System Requirements • An Ethernet-based Cable or DSL modem • IEEE 802.11n or 802.11g wireless clients Network.Requirements • IEEE 802.11a wireless clients • 10/100/1000 Ethernet Computer.with.the.following: • Windows®, Macintosh, or Linux-based operating system • An installed Ethernet adapter Browser.Requirements: Web-based.Configuration. -
Page 7: Introduction
Section 1 - Product Overview Introduction TOTAL.PERFORMANCE Combines award winning router features and IEEE 802.11a/g/n wireless technology to provide the best wireless performance. TOTAL.SECURITY The most complete set of security features including Active Firewall and WPA/WPA2 to protect your network against outside intruders. TOTAL.COVERAGE Provides greater wireless signal rates even at farther distances for best-in-class Whole Home Coverage. -
Page 8: Features
Section 1 - Product Overview Features •.Faster.Wireless.Networking - The DIR-640L provides up to 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. The performance of this 802.11n wireless router gives you the freedom of wireless networking at speeds 14x faster than 802.11g. -
Page 9: Hardware Overview
Section 1 - Product Overview Hardware Overview Connections Reset Button Pressing the Reset button restores the router to its original factory default settings. LAN Ports (1-4) Connect 10/100/1000 Ethernet devices such as computers, switches, and NAS. Internet Port The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem. Power Receptor Receptor for the supplied power adapter. -
Page 10: Leds
Section 1 - Product Overview Hardware Overview LEDs 1 2 3 Power LED A solid light indicates a proper connection to the power supply. Internet LED A solid light indicates connection on the Internet port. This LED blinks during data transmission. A solid light indicates that the 2.4GHz wireless segment is ready. -
Page 11: Installation
Section 2 - Installation Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. Before you Begin •... -
Page 12: Wireless Installation Considerations
Section 2 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. -
Page 13: Wall-Mount Kit Installation
Section 2 - Installation Wall-Mount Kit Installation The wall-mount kit includes the following items: - Two 2 cm screws - Two screw anchors - One attachment plate Step 1. Align the attachment plate to your preferred position, and mark the hole positions on the wall, preferably after you locate one of the studs in the wall. -
Page 14: Hardware Setup
Section 2 - Installation Hardware Setup 1. Turn off and unplug your cable or DSL broadband modem. This is required. Modem 2. Position your router close to your modem and a computer. Place the router in an open area of your intended work area for better wireless coverage. - Page 15 Section 2 - Installation 4. Plug one end of the included blue Ethernet cable that came with your router into the yellow port labeled INTERNET on the back of the router. Plug the other end of this cable into the Ethernet port on your modem. DIR-640L Modem 5.
-
Page 16: Connect To An Existing Router
Section 2 - Installation Connect to an Existing Router Note: It is strongly recommended to replace your existing router with the DIR-640L instead of using both. If your modem is a combo router, you may want to contact your ISP or manufacturer’s user guide to put the router into Bridge mode, which will ‘turn off’ the router (NAT) functions. - Page 17 Section 2 - Installation 5. Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save.Settings to save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the browser and change your computer’s IP settings back to the original values as in Step 1.
-
Page 18: Configuration
Section 3 - Configuration Configuration Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (http://192.168.0.1). Select Admin from the drop-down menu and the password should.be. left.empty. D-Link DIR-640L User Manual... -
Page 19: Internet Connection Setup
Section 3 - Configuration Internet Connection Setup Use this tab to choose either Static IP, DHCP, PPPoE, PPTP, or L2TP to configure your Internet connection. You may need to get this information from your ISP (Internet Service Provider). D-Link DIR-640L User Manual... -
Page 20: Static (Assigned By Isp)
Section 3 - Configuration Static (assigned by ISP) Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). -
Page 21: Dynamic (Cable)
Section 3 - Configuration Dynamic (Cable) My Internet Select Dynamic. IP. (DHCP) to obtain IP Address information Connection: automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for cable modem services. -
Page 22: Pppoe (Dsl)
Section 3 - Configuration PPPoE (DSL) Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. -
Page 23: Wireless Settings
Section 3 - Configuration Wireless Settings The Wireless Settings feature will allow you to create temporary zones that can be used by guests to access the Internet. Enable SSID: Check to enable the Multi-SSID wireless function. If you do not want to use SSID wireless, uncheck the box to disable all the wireless functions. - Page 24 Section 3 - Configuration Enable Auto This setting can be selected to allow the DIR-640L Channel Scan to choose the channel with the least amount of (5GHz): interference for the 5GHz band. Indicates the channel setting for the DIR-640L on the 5GHz Wireless 5GHz band.
-
Page 25: Network Settings
Section 3 - Configuration Network Settings This section will allow you to change the local network settings of the router and to configure the DHCP settings. Router Settings Router IP Address: Enter the IP address of the router. The default IP address is 192.168.0.1. -
Page 26: Dhcp Server Settings
Section 3 - Configuration DHCP Server Settings DHCP stands for Dynamic Host Control Protocol. The DIR-640L has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically. -
Page 27: Vpn Settings
Section 3 - Configuration VPN Settings On this page you can set up advanced options for a Virtual Private Network (VPN). The DIR-640L supports both IPSec and L2TP as the Server Endpoint. IPSec (Internet Protocol Security) is a set of protocols that can provide IP security at the network layer. Add VPN Profile: Choose either IPSec or L2TPv3/L2TPv3. -
Page 28: Ipsec Settings
Section 3 - Configuration IPSec Settings The DIR-640L supports IPSec as the Server Endpoint. IPSec (Internet Protocol Security) is a set of protocols that can provide IP security at the network layer. IPSec: Check this box to enable IPSec. Tunnel Name: Enter a name for your VPN. - Page 29 Section 3 - Configuration Remote ID: Choose from Username, FQDN, User@FQDN, or Key.ID using the drop-down menu and then the ID in the box. Local ID: Choose from Username, FQDN, User@FQDN, or Key.ID using the drop-down menu and then the ID in the box. Dead Peer Check this box to enable Dead Peer Detection, then enter the time in seconds in which a peer is determined to be no longer active.
-
Page 30: L2Tp Settings
Section 3 - Configuration L2TP Settings L2TPv3 uses UDP protocol to transport the PPP data. This is often encapsulated in IPsec encryption instead of MPPE. L2TP: Check this box to enable L2TP VPN settings. Multi-SSID 1-4: You can establish VPN settings on multiple SSIDs by enabling each of them here. -
Page 31: Advanced Network Settings
Section 4 - Advanced Advanced Network Settings Enable WAN Ping Checking the box will allow the DIR-640L to respond Respond: to pings. Unchecking the box may provide some extra security from hackers. Enable SPI: Check this box to enable Stateful Packet Inspection which will only allow packets from known active connections and reject all others. -
Page 32: Tools
Section 5 - Tools Tools Admin This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has read-only access. -
Page 33: Time
Section 5 - Tools Time The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically adjust the time when needed. -
Page 34: Syslog
Section 5 - Tools SysLog The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs to a SysLog server on your network. Save Log File To Click the Save button to save a local copy of the Log file on Local Drive: your PC. -
Page 35: System
Section 5 - Tools System This section allows you to manage the router’s configuration settings, reboot the router, and restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created. Save Settings to Use this option to save the current router configuration settings Local Hard Drive:... -
Page 36: Firmware
Section 5 - Tools Firmware You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support website for firmware updates at http://support.dlink.com. -
Page 37: Dynamic Dns
Section 5 - Tools Dynamic DNS The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. -
Page 38: System Check
Section 5 - Tools System Check Host Name or IP The Ping Test is used to send Ping packets to test if a Address: computer is on the Internet. Enter the IP address that you wish to Ping and click Ping. Ping Result: The results of your ping attempts will be displayed here. -
Page 39: Status
Section 6 - Status Status Device Info This page displays the current information for the DIR-640L. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP. -
Page 40: Log
Section 6 - Status The router automatically logs (records) events of possible interest in its internal memory. If there isn’t enough internal memory for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option allows you to view the router logs. -
Page 41: Statistics
Section 6 - Status Statistics The screen below displays the Traffic.Statistics. Here you can view the amount of packets that pass through the DIR-640L on both the WAN, LAN ports and both the 802.11n/g (2.4GHz) and 802.11n/a (5GHz) wireless bands. The traffic counter will reset if the device is rebooted. -
Page 42: Wireless
Section 6 - Status Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. D-Link DIR-640L User Manual... -
Page 43: Vpn
Section 6 - Status This page is where the router displays information on the the current VPN tunnels. Refresh: Updates the VPN details on the screen so it displays any recent activity. D-Link DIR-640L User Manual... -
Page 44: Troubleshooting
Section 9 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-640L. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples. - Page 45 Section 9 - Troubleshooting • Configure your Internet settings: • Go to Start > Settings > Control.Panel. Double-click the Internet.Options Icon. From the Security tab, click the button to restore the settings to their defaults. • Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked.
- Page 46 Section 9 - Troubleshooting 3..Why.can’t.I.connect.to.certain.sites.or.send.and.receive.emails.when.connecting.through.my.router?. If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to.
- Page 47 Section 9 - Troubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480).
-
Page 48: Wireless.basics
Appendix A - Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. -
Page 49: What Is Wireless
Appendix A - Wireless Basics What.is.Wireless? Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network. Why.D-Link.Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. - Page 50 Appendix A - Wireless Basics Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries.
-
Page 51: Tips
Appendix A - Wireless Basics Where.is.wireless.used?. Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”. -
Page 52: Wireless Modes
Appendix A - Wireless Basics Wireless Modes There are basically two modes of networking: • Infrastructure – All wireless clients will connect to an access point or wireless router. • Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more DIR-640L wireless network Cardbus adapters. -
Page 53: Networking.basics
Appendix B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start >... -
Page 54: Statically Assign An Ip Address
Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step.1 Click on Start > Control.Panel > Network.and.Internet > Network.and.Sharing.Center. Windows®... -
Page 55: Technical.specifications
Appendix C - Technical Specifications Technical Specifications Standards • 24 Mbps • 18 Mbps • 12 Mbps • IEEE 802.11n • 11 Mbps • 9 Mbps • 6 Mbps • IEEE 802.11g • 5.5 Mbps • 2 Mbps • 1 Mbps •... -
Page 56: Gpl.code.statement
Appendix D - GPL Code Statement GPL Code Statement This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at: http://tsd.dlink.com.tw/GPL.asp The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more... - Page 57 Appendix D - GPL Code Statement Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users.
- Page 58 Appendix D - GPL Code Statement .TERMS.AND.CONDITIONS 0..Definitions. “This License” refers to version 3 of the GNU General Public License. “Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. “The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees” and “recipients” may be individuals or organizations.
- Page 59 Appendix D - GPL Code Statement The “System Libraries” of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form.
- Page 60 Appendix D - GPL Code Statement 3..Protecting.Users’.Legal.Rights.From.Anti-Circumvention.Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work’s users, your or third parties’...
- Page 61 Appendix D - GPL Code Statement A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an “aggregate” if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation’s users beyond what the individual works permit.
- Page 62 Appendix D - GPL Code Statement A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage.
- Page 63 Appendix D - GPL Code Statement When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work). You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission.
- Page 64 Appendix D - GPL Code Statement 8..Termination. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11).
- Page 65 Appendix D - GPL Code Statement You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it.
- Page 66 Appendix D - GPL Code Statement 11..Patents. A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor’s “contributor version”. A contributor’s “essential patent claims”...
- Page 67 Appendix D - GPL Code Statement A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non- exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or...
- Page 68 Appendix D - GPL Code Statement 14..Revised.Versions.of.this.License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
-
Page 69: Safety.statements
Appendix E - Safety Statements Safety Statements CE.Mark.Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. FCC.Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 70 Appendix E - Safety Statements The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. FCC.