Table of Contents
Advertisement
Configuring the LAN
1.
Click start - Control Panel.
2.
Click Network and Internet Connections; then, Network Connections. If the
Classic view is selected, double-click the Network Connections icon.
3.
Right-click Local Area Connection.
4.
From the pop-up menu, click Properties.
5.
In the Local Area Connection Properties dialog box, set the network setting
according to the instruction of your network administrator.
Make sure to log on the computer as a member of the Computer
administrators group. Otherwise, you cannot set or change some settings
for the LAN unit.
If you cannot access the network,
1.
Click start - Control Panel.
2.
Click Performance and Maintenance; then, System. If the Classic view is
selected, double-click the System icon.
3.
Click the Hardware tab; then, the Device Manager button.
4.
Double-click Network adapters, then, Realtek RTL8139/810x Family Fast
Ethernet NIC.
5.
Click the Advanced tab, and select Link Speed/Duplex Mode in the Property list
and select an appropriate value in the Value pull-down menu.
6.
Click OK and close the Device Manager window.
7.
Click OK and close the Control Panel window.
Configuring Network Settings
You can configure your network settings in various manners depending on the
network environment. This section provides one of them with the following
conditions.
•
Two computers, which do not have Internet connections, are connected directly to
each other with a cross LAN cable.
•
The two computers are running on Windows XP.
•
The Network Setup Wizard is used for network configuration.
Operation Manual
4
4-3
Advertisement
Table of Contents
