Bosch Truvo Original Instructions Manual page 18

18 | English
The measuring tool may not be 100 % accurate for technological
u
reasons. To eliminate hazards, familiarise yourself with further
sources of information, such as building plans and photographs
taken during construction, etc. before carrying out any drilling, saw-
ing or routing work on walls, ceilings or floors. Environmental influ-
ences, such as humidity, or proximity to devices that generate strong
electric, magnetic or electromagnetic fields, moisture, metallic building
materials, foil-laminated insulation materials or conductive wallpaper or
tiles may impair the accuracy of the measuring tool. The number, type,
size and position of the objects may distort the measuring results.
If there are gas pipes in the building, check to ensure that none of
u
them have been damaged after completing any work on walls, ceil-
ings or floors.
Product Description and Specifications
Please observe the illustrations at the beginning of this operating manual.
Intended Use
The measuring tool is intended for the detection of metal (ferrous and non-
ferrous metals, e.g. reinforcing steel) and live wires in walls, ceilings and
floors.
The measuring tool is suitable for indoor use.
Product features
The numbering of the product features shown refers to the illustration of the
measuring tool on the graphic page.
(1) Gripping surface
(2) On/off switch
(3) Live wire indicator
(4) Metal object indicator
(5) Light-up ring
(6) Left-hand and right-hand marking aids
(7) Top marking aid
(8) Sensor area
1 609 92A 8B4 | (02.03.2023) Bosch Power Tools