Opening And Closing; Accessory; Operating The Appliance; Switch The Appliance On And Off - Bosch BVE810NC0 Instruction Manual

Vacuuming drawer
Hide thumbs Also See for BVE810NC0:
Table of Contents

Advertisement

Opening and closing

Press on the middle of the drawer to open or close it.
The drawer will spring out gently when you open it. You
can then easily pull it out.

Accessory

The following accessories are included with the
vacuum-sealing drawer:
Special accessories
You can order special accessories from after-sales
service or from your specialist retailer:
Accessory
Vacuum-sealing bag
180 x 280 mm (x 100)
Vacuum-sealing bag
240 x 350 mm (x 100)
External vacuum-sealing adapter
The adapter is attached to the air out-
let on the vacuum-sealing drawer in
order to vacuum-seal vacuum-sealing
containers.
Vacuum-sealing hose
The vacuum-sealing hose connects
the external vacuum-sealing adapter to
the vacuum-sealing container.
Vacuum-sealing bags
180 x 280 mm (50 pcs)
240 x 350 mm (50 pcs)
Specialist retail-
After-sales ser-
er order number
vice order
number
HEZ66D910
17002081
HEZ66D920
17002082

1Operating the appliance

S witch the appliance on and off
O p e r a t i n g t h e a p p l i a n c e
Touch the on/off symbol to switch the appliance on or
off.
If you do not make any changes, the appliance
automatically switches off after 10 minutes.

Vacuuming in the container

Vacuum the food in a suitable vacuuming container in
order to preserve the food for longer.
Suitable vacuuming containers
Only use containers that are suitable for vacuuming
food. Commercially available products are different
when it comes to the quality of the food and the
material.
The vacuum hose that is enclosed with this appliance
has an inner diameter of 3 mm. To ensure that the hose
fits, you may require an adaptor for your container. In
many cases, these adaptors are already included with
the vacuuming containers.
Proceed as follows:
Open the glass lid.
1.
Plug the vacuuming adaptor into the air outlet.
2.
Secure the hose to the vacuuming adaptor and the
3.
vacuuming container.
Touch the À symbol to select a vacuum-sealing
4.
level.
Touch the start symbol to start the vacuum-sealing
5.
process.
The vacuum-sealing process will now start. The
vacuum-sealing level indicators will flash red one after
the other until the value you selected has been reached.
The vacuuming levels stop pulsating as soon as the
target value has been reached. The vacuuming level
that has been reached lights up and an acoustic signal
sounds. You can now detach the hose from the
container and the external vacuuming adaptor.
If larger bubbles form, cancel the vacuuming
Note:
process.
Operating the appliance
en
7

Advertisement

Table of Contents
loading

Table of Contents