Master Access Method Settings - Philips EasyKey 6000 Series User Manual

Light up the keypad
1
Master PIN code: Press [#] before
2
entering other numbers, then enter
the master PIN code and confirm
with [#], and you will be in master
mode.
Master fingerprint/ key tag： Press [#]
before entering other numbers, then
swipe the master key tag or scan the
master fingerprint, and confirm with
[#], and you will be in master mode.
Attention
When setting the master access method for the first
time, you can press [#] to enter the master mode.
Once you are in master mode, press [1] twice to add
the master access method and then complete the
remaining settings.
Master access
method settings
or
Press [#] and enter the master PIN code,
then confirm with [#]. Or press [#], swipe
the master key tag/scan the master
fingerprint to enter the master mode.
or
1 1
Press [1] to enter the master access
method settings, press [1] again to add a
master access method.
or
Add a master PIN code: Enter a new
master PIN code and confirm with [#],
then enter the master PIN code again and
confirm with [#]. After hearing a voice
prompt indicating that the master PIN
code was added successfully, press [*] to
return to the previous menu until you exit
the master mode.
Add a master fingerprint: Enroll
your finger through the fingerprint
sensor. After you hear a voice prompt
"Please press again", take your finger
off and put it back again, repeat the
action until you hear a voice prompt
indicating that the fingerprint was
added successfully. Press [*] to return
to the previous menu until you exit
the master mode.
Add a key tag: Place the key tag close
to the card reader until you hear a
voice prompt indicating that the key
tag was added successfully. Press [*]
to return to the previous menu until
you exit the master mode.
or
Press [#] and enter the master PIN code,
then confirm with [#]. Or press [#], swipe
the master key tag/scan the master
fingerprint to enter the master mode.
or
or
11