Table of Contents
Advertisement
8
Troubleshooting
Warning
•
Risk of electric shock. Never remove the casing
of the product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, get support at www.philips.
com/support.
Main unit
The buttons on the home theater do not work.
•
Disconnect the home theater from the
power supply for a few minutes, then
reconnect.
Picture
No picture.
•
Make sure that the TV is switched to the
correct source for the home theater.
•
If this happens when you change the
TV system, press
to open the disc
compartment, and then 439 on the remote
control to restore the default TV system.
•
If you have enabled the progressive scan
mode, press
to open the disc compartment,
and then 297 on the remote control to
disable the progressive scan.
Sound
No sound from home theater speakers.
•
Connect the audio cable from your home
theater to your TV or other devices (see
'Connect audio from TV and other devices'
on page 8 ) .
•
Reset your home theater to its factory
settings (see 'Restore default settings' on
page 14 ) , then switch it off and switch on
again.
On your home theater, press SOURCE
•
repeatedly to select the correct audio input.
Distorted sound or echo.
•
If you play audio from the TV through the
home theater, make sure that the TV is
muted.
Audio and video are not synchronized.
1) Press and hold AUDIO SYNC . 2) Press
•
the +/- or Navigation buttons within 5
seconds to synchronize the audio with the
video.
Play
Cannot play a disc.
•
Clean the disc.
•
Make sure that the home theater supports
the type of disc (see 'Media formats' on page
15 ) .
•
Make sure that the home theater supports
the region code of the disc .
•
If the disc is a DVD±RW or DVD±R disc,
make sure that it is fi nalized.
Cannot play a DivX f le.
•
Make sure that the DivX fi le is encoded
according to the 'Home Theater Profi le' with
the DivX encoder.
•
Make sure that the DivX fi le is complete.
DivX subtitles do not display correctly.
•
Make sure that the subtitle fi le name is the
same as the movie fi le name (see 'Subtitles'
on page 10 ) .
•
Select the correct character set (see
'Subtitles' on page 10 ) .
Cannot read the contents of a USB storage
device.
•
Make sure that the format of the USB
storage device is compatible with the home
theater.
•
Make sure that the fi le system on the USB
storage device is supported by the home
theater.
'No entry' or 'x' sign appears on the TV.
•
The operation is not possible.
EN
17
Advertisement
Table of Contents
