Advertisement
Chemicals permitted for use
The chemicals listed below are permitted for use. For details of the handling
procedures for a chemical, refer to the documentation provided by its
manufacturer.
NOTICE:
Do not use hypochlorite for disinfecting the reference signal cables.
<<System main unit>>
Quaternary ammonium compound (0.75%) : Cleanisept
Quaternary ammonium compound (0.50%) : SUPER SANI-CLOTH
Quaternary ammonium compound (0.25%) : SANI-CLOTH
Sodium hypochlorite (0.65%)
Effervescent chlorine tablets, sodium dichloroisocyanurate (NaDCC)
Isopropyl alcohol 70 vol%
Ethanol for disinfection (76.9 to 81.4 vol% at 15 C)
<<Reference signal cable and ECG limb clips (clip-type electrodes)>>
Alkyldiaminoethylglycine hydrochloride (0.5%)
Benzalkonium chloride (0.2 w/v%)
Benzethonium chloride solution (0.2 w/v%)
Chlorhexidine gluconate solution (0.5 w/v%)
<<PCG sensor and pulse sensor>>
Ethanol for disinfection (76.9 to 81.4 vol% at 15 C)
Area that can be disinfected
The following parts cannot be disinfected.
Screen of the LCD monitor
Casters
Footswitch
Peripheral devices (printer, etc.)
Refer to the documentation provided with the peripheral devices.
Cables
: Dispatch
: BIOSPOT
No. 2B771-191EN*Q
236
wipes
®
®
®
PLUS
®
Hospital Cleaner or
Clorox Healthcare
Bleach
Germicidal Cleaner
®
* (5000 ppm)
* Not available in the USA.
Advertisement
