How To Use - Panasonic MJ-CB800 Operating Instructions Manual

■
Juicer
1
Place the container unit
onto the motor housing.
●
Make sure the spout and the
clamps are positioned the same
as illustrated.
●
Make sure the container unit sits
properly on the motor housing.
2
①
A ttach the pulp
container and make
sure it is fully aligned
with the body.
②
P lace the spinner
in the container unit
and fix it into position.
③
P lace the container cover onto the
container unit.
3
Push the clamps as
shown until a locking
sound is heard.
●
If the clamps are not clamped
correctly, the motor will not operate.
4
Place the juice cup as
shown.
●
Make sure the spout is in
the downward position when
juicing.
5
①Plug in and switch on.
②Insert the ingredients
one by one and push
them slowly into the
feeding tube using the
food pusher.
③Align the food pusher
into the feeding tube as illustrated.
6
After use, switch off and unplug.
●
While removing the juice
cup, ensure the spout is
pulled up to prevent juice
from dripping.
●
Ensure the spinner is fully
stopped before release the
clamps.
●
Some pulp might be hard to
collect in the pulp container
and stick on the container cover depending on the
ingredients and amount.

How to use

■
Blender
To assemble
Turn anticlockwise
1000
800
600
400
2
Make sure the gasket is not damaged and placed properly before assemble.
1
Place the ingredients into
blender jug, and then close the
cover.
●
Pour liquid first, followed by soft ingredients
and then others.
(i) Liquid (ii) Soft ingredients
(iii) Hard ingredients (iv) Ice cubes
2
Attach blender jug to the motor
housing.
A lign the △
①
on the motor
housing with
the ▽ on the
Lock
blender jug
base.
②
T wist blender jug clockwise until
you hear a click sound.
●
Blender jug only can be attached by above
steps.
3
Plug in. Hold
the cover, and
then turn on
the appliance
by pressing the
Top
required speed.
View
●
If the appliance stops
during operation. (P. EN9)
4
When blending is
completed, switch
off by pressing
the "0" button.
Unplug.
Turn the blender
jug anticlockwise
to remove it,
open the cover and take out the
ingredients.
■
Wet & Dry Mill
1
1
Turn the mill container upside
down and place the ingredients
in it. Twist the mill container
base clockwise until you hear a
click sound.
2
Attach the mill container to the
motor housing.
A lign the △
①
on the motor
housing
with the ▽
1
on the mill
Unlock
2
container
base.
②
T wist mill container clockwise until
you hear a click sound.
●
Mill container only can be attached by above
steps.
3
Plug in. Hold the
mill container,
2
and then turn on
the appliance
by pressing the
required speed.
1
●
If the appliance stops during operation. (P. EN9)
3
4
When grinding is completed, switch
off by pressing the "0" button.
Unplug. Turn the mill container
4
anticlockwise to remove it, open
the mill container, and take out
3
the ingredients.
2
1
To assemble
Turn clockwise
2
Mill
1
Gasket
Mill Container
2
1
Unlock
Lock
2
3
4
3
2
1
1
EN7