Table of Contents
Advertisement
Factory reset
Reset device to default setting.
1 Turn on the soundbar.
2 Press and hold + and - on the soundbar
for 8 seconds. Display will show "RESET" for
5 seconds. When the system reboots, the
display will show "REBOOT".
Bluetooth operation
Through Bluetooth, connect the soundbar
with your Bluetooth device (such as an
iPad, iPhone, iPod touch, Android phone,
or laptop), and then you can listen to the
audio �les stored on the device through
your soundbar.
1
Press the
button on soundbar or
on the remote control to switch the
soundbar to Bluetooth mode.
→The display will show "Pairing".
2
On the Bluetooth device, switch
on Bluetooth, search for and select
Philips TAB7568 to start connection
(see the user manual of the Bluetooth
device on how to enable Bluetooth).
3
Wait until you hear the voice prompt
from the soundbar.
→ If successfully connected, the display
will show "BT".
4
Select and play audio �les or music on
your Bluetooth device.
•
During play, if a call comes in,
music play pauses. Play resumes
when the call ends.
17
EN
•
If your Bluetooth device supports
AVRCP pro�le, on the remote
control you can press
skip to a track, or press
pause/resume play.
5 To disconnect Bluetooth connection
and pair a new Bluetooth device：
→ Press and hold the
the remote control or
on the soundbar for 3 seconds to
disconnect the current Bluetooth
connection and enter Pairing
mode.
Note
•
In an open space without obstructions，
the maximum operational range between
the soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
•
Compatibility with all Bluetooth devices is not
guaranteed.
•
The music streaming may be interrupted by
obstacles between the device and soundbar,
such as wall, metallic casing that covers the
device, or other devices nearby that operate in
the same frequency.
to
/
to
button on
button
Advertisement
Table of Contents
