Tamper Protection - Bosch APC-AMC2-4R4CF Installation Manual

34 en | Installing
4.16

Tamper Protection

To protect the AMC2-4R4 against unauthorized access and so prevent tampering with
sensitive data, the AMC2-4R4 provides an additional interface to connect external tamper
contacts. This interface is a potential-free 2-pin pluggable screw connector marked with T.
When not in use this tamper contact should be shorted.
Figure 4.22: Location of the tamper protection contact
2020-01 | V02 | Installation manual
Access Modular Controller 2
Bosch Security Systems B.V.