Maintenance; Admin - D-Link DCS-5010L User Manual

Section 4 - Configuration
This section allows you to change the administrator's password and configure the settings for your camera. The administrator can also create user
account(s) for individuals allowed to access your camera. These users will only be able to access the Live Video page, and will not be able to change
camera settings.

Admin

To change the admin password used to log into the Web interface,
Password: enter the Old Password, then enter the New Password and retype it
in the next text box to verify. Then click Apply.
Camera Name: Enter a name for your camera.
LED Control: Click Normal to enable the LEDs on the front of the device, or select
Off to disable the LEDs. Disabling the LED function may be useful if
you want to make the camera less obvious.
User Access Click Enable to enable user access control or Disable to allow only
Control: the administrator account to access the camera.
Snapshot URL Click Enable to allow access to the current camera snapshot using
Authentication: the Web address displayed.
OSD Time: Click Enable to allow on-screen display of the current time to be
added to the video.
Color: If OSD is enabled, you can select a color from the drop-down menu
to use for the text.
Add User You can create user accounts for individuals with viewing access to
Account: your camera. Users will be limited to access to the Live Video page
of the Web configuration interface. They will not have access to any
other screens, or be allowed to change any settings.
To create a new user, enter a User Name, Password, and retype the
Password to verify. Then click Add. A maximum of eight user accounts
can be created.
User List: Displays an account Name for each authorized user. The administrator
can modify or delete an account by clicking on its edit or trash icon.
D-Link DCS-5010L User Manual

Maintenance

Admin
45 45