Auto adjust
Press "Set" to detect and adjust H position, V position, Clock, Phase
automatically.
Screen reset
Reset all settings in the Screen menu to factory preset values.
Select "Yes" and press "SET" button to restore the factory preset data.
Press "EXIT" button to cancel and then return to the previous menu.
6.2.3. Audio menu
Balance
Adjust to emphasize left or right audio output balance.
Treble
Adjust to increase or decrease higher-pitched sounds.
Bass
Adjust to increase or decrease lower-pitched sounds.
Volume
Adjust to increase or decrease the audio output level.
Audio out (line out)
Adjust to increase or decrease line out output level.
Maximum volume
Adjust your own limitation for the maximum volume setting. This stops the
volume from being playing at too loud a level.
Minimum volume
Adjust your own limitation for the minimum volume setting.
Mute
Turn the mute function on/off.
Audio source
Select the audio input source.
Analog: audio from audio input
Digital : audio from HDMI/DVI audio.
Displyport: audio from DP.
Sync. Volume
Enable/disable audio out (line out) volume adjustability.
Audio reset
Reset all settings in the Audio menu to factory preset values.
6.2.4. PIP menu
Sub mode
Select the PIP (Picture-in-Picture) mode.
Choose from: {Off} / {PIP} / {PBP} / {Quick swap} / {Custom}.
PIP size
Select the size of the sub picture in the PIP (Picture-in-Picture) mode.
Choose from: {Small} / {Medium} / {Large}.
PIP position
Select the position of the sub picture in the PIP (Picture-in-Picture) mode.
Choose from: {Bottom-Right} / {Bottom -Left} / {Top-Right} / {Top-Left}.
PIP change
Exchange input signal of Main and Sub for PIP / PBP / Quick swap mode.
PIP source
Select the input signal for the sub picture.
PIP audio
Select the audio source in the Sub mode.
• {Main} - Select audio from the main picture
37
Off
PIP
Quick swap
SA495-Y/SA555-Y
PBP 2Win
Sub Win1
Input
Switch main on top or
sub on top.