Interconnection - Siemens milltronics Instruction Manual

Mounting Bracket
66 mm
(2.6")
53 mm
(2.09")

Interconnection

Note:
All wiring must be done in conjunction with approved conduit, boxes, and
fittings and to procedures in accordance with all governing regulations.
Ensure that there is sufficient slack in the cabling to allow the TASS arm to pivot freely so
the wheel rides on the belt. Restriction of the arm can cause slippage or excessive
contact between the belt and the wheel.
Connection
Page 4 TASS Speed Sensor – INSTRUCTION MANUAL
20mm
(0.79")
60 mm
(2.36")
48 mm
(1.89")
TASS
brown excitation (+15 V DC)
black signal
blue common
9 mm (0.35"), 2 places
6 mm (0.24"), 2 places
12 mm (0.48"), 2 places
Integrator
25 mm
(0.98")
7ML19985HL61