Detail - Panasonic AK-HRP1010G Operating Manual

DETAIL

Touch mode
C 0 1 : E N G
D E T A I L
DTL CORING
0 15
FRE- LEVEL
QUENCY DEPEND.
0 0
GAIN(+) GAIN(-)
0 0
Item
DTL Sets the level of the overall detail effect (master detail).
This is enabled when [SW] is "ON".
CORING Sets the level of signal (including noise) that does not activate the detail effect.
This is enabled when [SW] is "ON".
V DTL LEVEL Sets the intensity of the detail level in the vertical direction.
This is enabled when [SW] is "ON".
H DTL LEVEL Sets the intensity of the detail level in the horizontal direction.
This does not work with AG-CX350.
FRE-QUENCY Sets the thickness (boost frequency) of the detail.
This is enabled when [SW] is "ON".
LEVEL DEPEND. Compresses the detail of dark areas when detail of the brightness signal is emphasized. The larger the set-
ting value the more that detail of bright areas is compressed.
This is enabled when [SW] is "ON".
KNEE APE LV Sets the detail level of high-brightness areas (extremely bright areas).
This is enabled when [SW] is "ON".
GAIN(+) Sets the detail level of the plus direction (to make brighter).
This is enabled when [SW] is "ON".
GAIN(-) Sets the detail level of the minus direction (to make darker).
This is enabled when [SW] is "ON".
SW Sets the detail function (video contour adjustment) to ON/OFF.
1 / 1
V DTL H DTL
LEVEL LEVEL
0 -
KNEE
APE LV
2
SW
ON
ROP Menu (during AG-CX350 Connection)
Legacy mode
C 0 1 : E N G
D E T A I L
DTL CORING
0 15
V DTL H DTL
LEVEL LEVEL
0 -
FRE- LEVEL
QUENCY DEPEND.
0
C 0 1 : E N G
D E T A I L
GAIN(+) GAIN(-)
0
SW
ON
Setting details
- 21 -
1 / 2
KNEE
APE LV
0 2
2 / 2
0