LG TurboWash WM3070H A Series Manual page 62

Error Codes – FE
NOTE: If "FE" is displayed, the drain pump will operate to drain the water
automatically.
LG Electronics Training Center, LGEAI, U.S.A.
Error Codes – PE
LG Electronics Training Center, LGEAI, U.S.A.
• The FE Error Code indicates an "Over Flow Error"
• Condition: The Pressure Sensor is showing that the
water level has exceeded 213.
• Possible Causes:
 Stuck Water Inlet Valve
 Low water pressure
 Bad Main Board
 Bad Pressure Sensor
122
• The PE Error Code indicates a "Pressure Sensor Error"
• Condition: The Pressure Sensor is showing either 5vdc
or 0vdc.
• Possible Causes:
 Pressure Sensor is disconnected
 Pressure Sensor either open or shorted
 Bad Main Board
123