Page 1
SHUTTLE AM www.pivotcycles.com info@pivotcycles.com 1.877.857.4868 Original Operational Instructions...
Page 2
Bosch E-bike System. This document contains some helpful diagrams and reference material to make sure you have everything necessary to maintain your Shuttle AM and enjoy it to the fullest.
QUICK START GUIDE This "Quick Start Guide" provides the essential information to set up your bike. Suspension/Tire Set-up COMPONENT QUICK START SETTING Body Weight in [kg] to [bar] 0.15 × Body Weight [kg] + 2 [bar] Shock Air Pressure Body Weight in [kg] to [psi] 2.2 ×...
QUICK START GUIDE Mini Remote and System Controller Function (10) (11) (12) (13) (14) (1) Mini Remote operating unit (8) Holder (2) System Controller (9) Fastening screw for holder (3) LED indicator lamp (10) Assistance level LED (4) Button for increasing support level +/ bike lights (11) ABS LED (optional)/ ambient light sensor (5) Select Button (12) On/off button...
BIKE SET-UP Setting Proper Sag 1. Always set sag with the blue climb switch lever to the open position. (fig. 1) OPEN COMPRESSION DAMPING 2. If your shock has additional compression and rebound adjustments ensure they are adjusted to be fully open, compression to the softest setting, and rebound to its fastest setting.
BIKE SET-UP Setting Rebound Damping on the Fox Float X • Rebound is set from the most open (fully counter-clockwise) position. • The rebound setting is determined by the air pressure in the shock. • Refer to the table below for the suggested rebound setting. The number in the chart refers to how many clicks in (clockwise) from the open setting the rebound should be set.
BIKE SET-UP Setting Compression Damping on the Fox 36 Grip 2 Forks • To set compression, start from the open (or fastest) position by turning the black (LSC) dial & blue (HSC) dial counterclockwise until they stop clicking. • A good starting point for most riders is to turn the black (LSC) dial clockwise 5 clicks &...
Establishing a Smartphone Connection In order to use some of the eBike functions, a smartphone with the eBike Flow app is required. Download the Bosch eBike Flow app to your smartphone from the app store and follow the instructions on the app.
Display Options Bosch offers a few different display options you can integrate with your Shuttle AM. Bosch also offers different mounts if you would like to use your smart phone as a display with the eBike Flow App.
SCHEMATICS Small Parts Schematic ATTENTION: Lower links are marked with an arrow on the non-drive side. The link must be oriented where the arrow points to the front triangle. www.pivotcycles.com info@pivotcycles.com 1.877.857.4868...
SCHEMATICS Shuttle AM Wiring Diagram • The diagrams below will help illustrate how the wires are to be routed through the internal cable guides. • The routing shown below will help minimize the likelihood of pinching a wire when removing and installing the motor for maintenance purposes.
Battery Safety • Refer to the current Bosch battery manual from safety and care instructions before use. • Batteries are subject to the dangerous goods regulations. Private users are permitted to transport them on the road without further conditions. If transported by commercial third parties (e.g. by air freight, logistics companies, or postal service) special conditions apply to packing and labeling.
Observe the notes on the respective labels on the rechargeable battery or on the charger. SOURCES Bosch Performance CX Drive System Additional information regarding safety, operation, functionality of the Bosch Performance CX Drive System, its components, software and mobile apps can be found on their website Bosch by scanning the QR code to the right.