Remove the top cover 1 and put the Plus touch down
on the display screen side 2.
Connector
Built-in Battery
Take out the built-in battery.
Lift the opposite side of the connector-mounted face, taking care not to press
excessively on the connector.
Remove the connector from the board.
Pull the cable connecting the built-in battery and connector straight in the direction
indicated by the arrow, the then remover.
Built-in Battery
Tape the cable to the battery unit and place it in a
plastic bag, etc.
Tape the cable to the removed built-in battery unit by covering the connector, and
place it in a plastic bag, etc.
Remove the battery after confirming that it has been fully consumed.
Remove the battery after confirming that the BATTERY switch is set to OFF.
Do not reconnect the removed built-in battery to the board connector.
1
2
Cable
Plus Touch
75