Electrolux KITWSRT Use And Installation Manual page 8

USE AND INSTALLATION MANUAL
Only specialised personnel are authorised to operate the machine.
Dispose of the packaging of the parts and any bags or boxes responsibly.
Any parts that are replaced must be disposed of in accordance with current regulations.
DANGER! The tasks described in this manual are reserved for specialised personnel, authorised
by the manufacturer, to perform them in compliance with the regulations in force in the country of
use and the relevant system and work safety standards.
DANGER! Before carrying out any work on the equipment, carefully read all the indications given
in this booklet and in the use and installation manual supplied with the equipment.
DANGER! This manual must be kept in a safe place for future use.
DANGER! Always work when you are in perfect physical condition and wearing personal
protective equipment (safety shoes, gloves, goggles, etc.).
DANGER! When working on the equipment, make sure that there are no unauthorised persons,
inflammable or explosive material and objects that could hinder operations, in the work area.
DANGER! Before carrying out any work on the equipment, ALWAYS disconnect the water and
electricity supply (danger of fatal electrocution!).
DANGER! If any parts have been replaced, do not leave their packaging unattended (e.g. plastic
bags): danger of suffocation for children and animals. Dispose of the packaging according to local
regulations.
DANGER! Any work, tampering or modifications not expressly authorised, which do not respect
the provisions indicated in this manual, could cause harm, injury or fatal accidents and will void
the warranty.
DANGER! Make sure the premises are well ventilated during all work on the equipment.
DANGER! After the work has been completed and before starting up the machine:
make sure that all parts and any safety devices that have been dismantled are correctly
reassembled;
make sure that the machinery has been correctly connected to the electricity supply;
tell the operator about any new devices on the machine.
DANGER! Surfaces get hot during use and may remain hot for some time after the machine has
been switched off, therefore, any maintenance work should be carried out after the machine has
cooled down completely.
DANGER! Some of the metal sheets have sharp inner edges: always wear gloves.
8