Kenwood TH-D74E Service Manual page 30

LCD display in the adjustment mode
Minor items (">" will appear when selected)
Key operation in the adjustment mode
Key name
Encoder, [], [] Adjustment item change
[] -
[], [ENT], [Write] ([A/B]) Set to adjustment value change/adjustment
mode, and ">" moves to "Temporary."
[Auto] ([MODE]) -
Note:
• Transmission power adjustments are possible with the [], [ENT] or [Write] key only during transmission.
• The backlight will not be lit while in adjustment mode so as to prevent the adverse influence of the backlight current on the
adjustment.
*1
(1) The BPF automatic adjustment will start when the [Auto]
key is pressed.
The adjustment value will be set when the automatic
adjustment is finished successfully.
1-30 (No.RA044<Rev.001>)
Major items and service setup
Adjustment frequency
Value stored in the transceiver
Present value
RSSI value (displayed only during
BPF adjustment)
* "TX Current" will appear during
transmission power adjustment.
">" appears for minor items
(Adjustment item change mode).
[ ] press
Function
">" appears for "Temporary"
(Adjustment value change/Setting mode)
Adjustment value change
Goes to adjustment item change mode
Adjustment value change
Start of automatic adjustment (BPF calibration adjustment)*1
"Adjust NG" will appear if the automatic adjustment fails.
(2) Calibration is adjusted with the [Auto] key.
[ ] press