Advertisement
Installation Instructions
4.2 Frame Mount
The air handler comes with 6 clearance holes (3 on each side). These holes are
used to mount the air handler inside of a frame structure (see Figure 6). When
mounting in this fashion, make sure that the wood screws are mounted from within
the air handler and not from outside the unit in order to avoid damaging the coil. If
the frame does not provide support in the front of the unit and additional support
is needed, open up the tabs and fix the unit to the frame or other support structure
with screws. Select a solid and level site to ensure proper installation of the frame
mount. Verify that there is sufficient space for installation and maintenance (see
Figure 7).
CAUTION: PERSONAL INJURY,PRODUCT DAMAGE,
PROPERTY DAMAGE
The (6) wood screws are not provided with the unit.
#12 x 1 ½˝ wood screws are recommended. When the unit is
installed on a wood frame, the screws should be used to fix the unit
to the studs. If they are not used, the unit may fall down or cause
other damage. See Figure 6 for frame mount installation.
BRACKET PLACEMENT
FOR HANGING
IN A CLOSET
THE TABS
WOOD SCREWS
SUPPORTING 2˝X 4˝
STRUCTURE
Figure 6
Frame Mount
10 |
WALL STRUCTURE
SUPPORTING
2˝X4˝ STRUCTURE
Figure 7
STUD ATTACHMENT
HOLES
AIRFLOW
Top view of the indoor unit clearance(including air duct).
≥0"
≥24"
Front of unit
Space for frame mount
T he installed unit must have the required clearances as shown in
Figure 7. Failure to follow these instructions may result in equipment
damage and/or premature equipment failure.
Bosch BWA Series Air Handler - BTC 761703105 A (03.2023)
≥0"
Advertisement
