HP EliteDesk 800 G3 SFF Hardware Reference Manual page 39
Hide thumbs
Also See for EliteDesk 800 G3 SFF:
- Maintenance and service manual (165 pages) ,
- Hardware reference manual (65 pages) ,
- Disassembly instructions manual (11 pages)
Advertisement
9.
Disconnect the power cable (1) and data cable (2) from the rear of the hard drive.
10.
Pull the release lever at the rear of the drive outward (1). Then slide the drive back until it stops and pull
it down and out of the drive bay (2).
11.
If you are installing a new drive, refer to
installing a new drive, rotate the drive cage down and replace the front bezel and access panel.
Installing a 2.5-inch hard drive on page
34. If you are not
Removing and installing drives
33
Advertisement
