D-Link DCS-2530L User Manual page 33

Section 3: Configuration
In this section, you can configure the video image settings for your camera.
Enable Privacy Mask The Privacy Mask setting allows you to specify up to 3 rectangular areas
Setting: on the camera's image to be blocked/excluded from recordings and
snapshots.
You may click and drag the mouse cursor over the camera image to draw
a mask area. Right-clicking on the camera image brings up the following
menu options:
ƒ Disable All: Disables all mask areas
ƒ Enable All: Enables all mask areas
ƒ Reset All: Clears all mask areas.
Mirror:
This will mirror the image horizontally.
Flip:
This will flip the image vertically. If the camera is installed upside down,
Flip and Mirror should both be checked.
Anti Flicker:
Select the frequency used by your power lines to avoid interference or
distortion.
White Balance:
Use the drop-down box to change white balance settings to help balance
colors for different environments. You can choose from Auto, Outdoor,
Indoor, and Fluorescent.
Exposure Mode:
Changes the exposure mode. Use the drop-down menu to set the
camera for Outdoor, Indoor, or Night environments, or to Moving to
capture moving objects. The Low Noise option will focus on creating
a high-quality picture with reduced noise when monitoring low-light
environments. You can also create three different custom exposure
modes that let you set the minimum and maximum shutter speeds. The
Max Gain setting will allow you to control the maximum amount of gain
to apply to brighten the picture.
D-Link DCS-2530L User Manual
Image Setup
33