Panasonic KX-NCP500 Pt Programming Manual page 21

2.1.2 Maximum Values
Throughout this manual, maximum entry values are shown for each programming item, as shown in the
example below.
[351]
ENTER
However, please note that slot and port entry values are not listed within each programming item. These values
vary depending on the model of PBX and the card type installed, as shown below.
Available Slot Entry Values
PBX Model
KX-NCP500
KX-NCP1000
Enter slot numbers as two-digit numbers (e.g. "04" for slot 4).
Available Port Entry Values
Card Type
BRI2
DHLC4
DLC8
DLC16
DPH2
DPH4
LCOT4
Enter values as two-digit numbers (e.g. "04" for port 4).
*1 Enter card number and port number as single-digit numbers (e.g. "34" for card 3, port 4).
Carrier Table No. Trunk Group No.
01–10
Free Slot Number
01–05
01–07
01–02
01–04
01–08
01–16
11–32
*1
11–34
*1
01–04
SELECT SELECT
Disable/
Enable
01–64
Port Number
2.1.2 Maximum Values
END
ENTER
Supported Cards
All cards
Related Programming
[400] [409] [42x] [450]
[600] [601]
[72x]
[400] [409] [41x] [450]
PT Programming Manual 21