Husqvarna AUTOMOWER 430X Operator's Manual page 25

3. Use the arrow buttons and the OK button to
select the day.
4. Use the arrow buttons and the OK button to
select the time period.
5. Enter the time with the number buttons. The
product can cut the grass 1 or 2 periods
each day.
6. If the product must not cut grass on a
specified day, unselect the box adjacent to
the 2 time periods.
3.10.2.3 To copy the timer setting
To get access to the menu
1. Do steps 1–3 in
on page 24 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Overview Timer settings > Overview > Copy
to .
3. Use the arrow buttons and the OK button to
copy the timer setting. You can copy the
timer settings day to day or for the full week.
3.10.2.4 To reset the timer setting
You can remove all timer settings and use the
factory setting. The factory timer setting lets the
product to operate all hours of each day of the
To do the timer settings on page
week. Refer to
24 .
To do the basic settings on
1. Do steps 1–3 in
page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Overview Timer settings > Overview > Reset
timer .
a) Push the arrow buttons to select
Current day to only set the current day
to factory settings.
1201 - 001 - 05.06.2019
b) Push the arrow buttons to select
week to reset all timer settings to
factory settings.
3. Push the OK button.
3.10.3 Cutting height
The cutting height can be varied from
MIN (2 cm / 0.8 in.) to MAX (6 cm / 2.5
in.).
Note: The height adjustment setting is shown in
the display of the product as a scale/numerical
value.
CAUTION: During the first weeks after
a new installation, the cutting height
must be set to MAX to avoid damaging
the loop wire. After this, the cutting
height can be lowered step by step
every week until the desired cutting
height has been reached.
Timer >
3.10.3.1 To set the cutting height
1. Do steps 1–3 in
on page 24 .
2. Use the arrow buttons and the OK button to
move through the menu structure
height .
3. Use the arrow buttons to set the cutting
height.
4. Push the OK button.
3.10.4 Security level
There are 3 security levels for the product
Medium and High or you can select your settings
Custom .
in
Function
Timer >
Alarm
PIN-code
Time lock
All
To get access to the menu
Cutting
Low ,
Low Medium High
X
X X
X X X
Installation - 25