Digital Video Recorder 440/480 Series
5.4
Viewing pictures
The unit has two monitor outputs, A and B. The way in which these monitors display pictures
depends on how the system is configured.
5.4.1
Monitor A
Monitor A is the main monitor. It shows full-screen, quad or multiscreen live or playback
camera pictures. Status messages, alarms, motion, and video loss warnings are also displayed
on this monitor. When the menu system is activated, it is displayed on this monitor. Monitor A
is the default monitor for keyboard and mouse commands.
Changing the full-screen display on Monitor A
To control the display on monitor A with mouse control:
1.
2.
3.
Changing the quad/3x3 display on Monitor A
To control the quad/3x3 display on monitor A with mouse control:
1.
2.
3.
5.4.2
Monitor B
Monitor B displays full-screen, quad or multiscreen (with or without sequence) of live
pictures. When an alarm or motion input is detected, the camera picture with the Alarm/
Motion indicator can be displayed on monitor B. When multiple alarms or motion occur,
camera pictures are sequenced on monitor B.
Changing the full-screen display on Monitor B
To control the display on monitor B with mouse control:
1.
2.
3.
Changing the quad display on Monitor B
To control the quad display on monitor B with mouse control:
1.
2.
Bosch Security Systems
Display the System Control Bar.
Click
.
From the pop-up menu, select the display for Monitor A
–
Select 1-4/8 for the corresponding Camera
–
Select the sequence
Display the System Control Bar.
Click
.
From the pop-up menu, select the display for Monitor A
–
Select the quad key
–
Select the multiscreen key
–
Select the sequence
Bring up the System Control Bar.
Click the Monitor B
From the pop-up menu, select the display for Monitor B
–
Select 1-8/16 for the corresponding Camera
–
Select the sequence
Bring up the System Control Bar.
Click the Monitor B
Installation and Operation manual
key to sequence channels 1-4/8
to select the quad mode
to select the 3x3 mode (DVR 480 only)
key to sequence the quad mode
button.
key to sequence channels 1-8/16
button.
Operating instructions | en
AM18-Q0605 | v2.0 | 2012.04
33