Remove The Base Assembly For Vesa Mounting - Philips 27E1N5600AE User Manual

2.5 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen. Then
lift the monitor stand.
27E1N5600AE
27E1N5600HE
2. While keeping the release button
pressed, tilt the base and slide it out.
27E1N5600AE
27E1N5600HE
Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface.
VESA Mounting Screw M4. Always
contact manufacturer for wall-mount
installation.
27E1N5600AE
100mm
27E1N5600HE
* Display design may differ from those
illustrated.
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
15
100mm
100mm
100mm
0°
-5°
90°