Table of Contents
Advertisement
27ST220L
WELCOME MESSAGE* (>)
Applicable / available only to the Commercial Mode / setup menu. The Welcome Message feature makes it possible
for an on-screen message to appear whenever the television is first turned on. The message will remain until any
front-panel keyboard command or remote control command is received. The Welcome Message sub-menu is shown
below.
Use cursor-up and cursor-down to select the Welcome Message sub-menu item. While Line 1 or Line 2 of the
Welcome Message message is highlighted, use cursor-left and cursor-right to enter message-edit mode and position
the cursor within the line of the message content. Use cursor-up and cursor-down to change the character at the cur-
rent position. Press RECALL on the Setup Remote to exit the editing mode and resume Welcome Message sub-menu
item selection.
NOTE: WELCOME MESSAGE, when ON, overrides CHANNEL GUIDE at power-on, if the latter has been
enabled.
CHANNEL GUIDE* (OFF / ON / POWER ON)
Applicable / available only to the Commercial Mode / setup menu. CHANNEL GUIDE provides an on-screen list
of all channels / inputs currently saved in the channel ring (see CHANNEL INSTALL) and their corresponding labels
(see CHANNEL INSTALL), for any channels / inputs for which labels have been assigned. When CHANNEL
GUIDE is ON, the channel guide appears when a remote control CH GDE command is received. When CHANNEL
GUIDE is set to POWER ON, the channel guide appears when the television is first powered on, as well as when a
remote control CH GDE command is received. When CHANNEL GUIDE is OFF, the channel guide never appears.
REMINDER* (OFF / ON)
The REMINDER feature, when ON, causes the television to constantly display the currently-tuned channel / input
and/or its label (if one has been assigned, see CHANNEL INSTALLATION) in the upper-left-hand corner of the
screen. When REMINDER is OFF, the channel number / label will only appear briefly immediately after channel /
input is selected.
NOTE: The REMINDER feature is available in the television's commercial-mode TV SETUP and CONSUMER
menus.
3-DIGIT ENTRY* (OFF / ON)
Applicable / available only to the Commercial Mode / setup menu. Determines whether two or three remote-control
digit commands initiate a channel-tune command. When OFF, tuning will occur upon the reception of two remote-
control digit commands.
H
T
U
T
O
OW
O
SE
HE
WELCOME MESSAGE
MESSAGE
LINE 1
LINE 2
CLEAR
EXIT
When ON, tuning will occur upon the reception of three remote-control digit commands.
* COMMERCIAL FEATURE
-S
M
(C
N
CREEN
ENU
ONTINUED
SETUP
CONSUMER
OFF / ON
(20 characters)
(20 characters)
>
>
SETUP
CONSUMER
SETUP
CONSUMER
SETUP
CONSUMER
9
)
FEATURES MENU
FEATURES MENU
FEATURES MENU
FEATURES MENU
Advertisement
Table of Contents
