Bosch TDS6040GB Operating Instructions Manual page 13

Table of Contents

Advertisement

Available languages

Available languages

Problem
Dirt comes out
through the
soleplate.
The "Calc'nClean"
indicator light (2)
does not turn off.
The appliance
makes a pumping
sound.
Loss of pressure
during ironing.
Water spots
appear on the
garment during
ironing.
The hose gets hot
during use.
Water leakage
from the boiler.
If the above tips do not solve the problem, get in touch with
our customer service.
Guarantee conditions
The terms of the guarantee for this appliance are in
accordance with that stated by our representative for the
country in which it is sold.
The details of these conditions can be obtained from the
retailer from whom the appliance was purchased. The
purchase receipt must be presented when making any
claims against the terms of this guarantee.
You can download this manual from the Bosch local
homepages.
* Model dependent
Possible causes
1. There is a build up of limescale
or minerals in the boiler and
iron.
2. Chemical products or additives
have been used.
1. The iron descaling process
has been stopped before
being completed.
1. Water is being pumped into
the steam tank.
2. The sound does not stop.
1. The steam release button has
been activated for too long a
period of time, meaning it has
been pressed too frequently.
1. May be caused by steam
condensed on the ironing
board.
1. This is normal. It is caused by
the steam passing through the
hose during steam ironing.
1. Boiler cap (8) is loose.
Solution
1. Carry out a cleaning cycle
(see the "Descaling
process" section).
2. Never add products to the
water (see the "Filling the
water tank" section).
Clean the soleplate with a
damp cloth.
1. Restart and complete the
iron descaling process.
1. This is normal.
2. If the sound does not stop,
do not use the steam station
and contact an authorised
technical service centre.
1. Use the steam release
button at intervals.
1. Wipe the textile cover of the
ironing board, and iron any
water drops to dry them.
1. Place the hose on the
opposite side so that you do
not touch the hose during
ironing.
1. Tighten the cap.
13
BOS CH

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents