If adding the BVIM into local network, then it needs to reset the BVIM IP address, and click "OK " button after setting. If there are multiple BVIMs in the same network
area, then the IP address should be different on each BVIM.
Fig.5-3
5.4.
FTP setting
Set the IP address, terminal, login name (Default: test) and password (Default: 123456) of ftp server. Click "apply" button after setting.
Fig.5-4
5.5.
Multi-pipe setting
Setting contents include:system mode (2:Two-pipe system,3:Three-pipe system), auto cooling and heating (only valid for Three-pipe system), temperature different
value (ΔT: different value of setting temperature and room temperature), changing time interval.