Table of Contents
Advertisement
Note
• MPRT: To reduce motion blur, LED
backlight will strobe synchronously
with screen refresh, which may
cause noticeable brightness change.
• 75Hz refresh rate or higher is re-
quired for MPRT.
• AMD FreeSync™ and MPRT cannot
be enabled simultaneously.
• MPRT is to adjust brightness for blur
reduction, so cannot adjust bright-
ness while MPRT is turned on.
• MPRT is gaming-optimized mode.
Turn on MPRT may cause noticeable
screen flickering. It is recommended
to turn off when you are not using
the gaming function.
•
This Philips monitor is certified
with AMD FreeSync™ only. The
technology is used to match the
refresh rate of the monitor to
the graphic cards. Providing the
smoothest gaming experience by
reducing or eliminating judder,
tearing, and stuttering.
Enabling Adaptive-Sync from
the On-Screen Display menu
will automatically activate the
appropriate technology depending
on the graphics card installed in your
computer:
•
If using an AMD Radeon graphics
card, FreeSync will be enabled.
•
Go to www.philips.com/support
to download the latest version of
leaflet to get more information on
FreeSync certification.
3
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
2560 x 1440. When the monitor is
powered on at a different resolution, an
alert is displayed on screen: Use 2560 x
1440 for best results.
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
Physical Function
4
Tilt
Warning
•
To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
•
Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
9
20°
-5°
Advertisement
Table of Contents
