Entering The Operator's Position - Toro 72904 Operator's Manual

Rollover Protection System
(ROPS) Safety
A Rollover Protection System (roll bar) is installed on
the machine.
WARNING
There is no rollover protection when the roll
bar is down. Wheels dropping over edges,
ditches, steep banks, or water can cause
rollovers, which may result in serious injury,
death or drowning.
• Do Not remove the ROPS.
• Keep the roll bar in the raised and locked
position and use seat belt.
• Lower the roll bar only when absolutely
necessary.
• Do Not wear seat belt when the roll bar is
down.
• Drive slowly and carefully.
• Raise the roll bar as soon as clearance
permits.
•
Be certain that the seat belt can be released
quickly in the event of an emergency.
•
Check carefully for overhead clearances (i.e.
branches, doorways, and electrical wires) before
driving under any objects and Do Not contact
them.
•
In the event of a rollover, take the unit to an
Authorized Service Dealer to have the ROPS
inspected.
•
Replace a damaged ROPS. Do Not repair or
revise.
•
Any accessories, alterations, or attachments
added to the ROPS must be approved by Toro.
Entering the Operator's
Position
Use the mower deck as a step to get into the
operator's position (Figure
1. Step here.
27
17).
Figure 17
g029797