Table of Contents
Advertisement
en Cleaning and servicing
Open and remove the service flap.
4.
Slide a sufficiently large container
5.
under the opening.
6.
CAUTION - Risk of scalding!
When you wash at high temperat-
ures, the detergent solution gets
hot.
Do not touch the hot detergent
▶
solution.
To allow the detergent solution to
flow out into the container, remove
the pump cap carefully.
32
1
2
Cleaning the drain pump
Requirement: The drain pump is
empty. → Page 31
Clean the interior, the thread on
1.
the pump cap and the pump hous-
ing.
The pump cap is comprised of two
parts which can be taken apart for
cleaning.
Ensure that the impeller in the
2.
drain pump can rotate.
Insert the pump cap.
3.
Ensure that the parts of the
‒
pump cap are correctly as-
sembled.
Screw the pump cap as far as it
4.
will go.
The handle on the pump cap must
be in a vertical position.
Advertisement
Table of Contents
