Meaning Of Icons On The Display; Turning On The Device; Program Function - Electrolux ECH/AG2-1300 3BE EEC User Manual

6
www.home-comfort.com
1
Fig. 2 Control panel
1. LED display.
2. Button to increase the value of target
temperature.
3. Button for switching on/off the device +
switching between Comfort, Eco, Anti-frost
modes.
4. Button for turning on/off the open window
function.
5. Button for reducing the target temperature.
Indicators designation on LED
display
1
7
1. Indication of the current power of the
heating element:
- full - two bars are lit;
- half - one bar is on.
2. 2. display of the target temperature and
Display target temperature and errors.
3. Wi-Fi connection status.
4. Indication of the Open Window function.
5. Indication of the convector work:
- lit red - the convector is on;
- not lit - the convector is off.
6. Indication of the current heating mode:
- Comfort - orange;
- Eco - green;
- Anti-frost - blue.
7. Indication of the status of the micathermic
heating element operation.

Turning on the device

Press the on/off button
run mode. Press the button
2
3
5 4
2
6 5
to put the unit into
to turn on the
device. The factory set temperature is +24 ºС.
Heating power setting
To turn on half power heating element, press
the and buttons
2 seconds. One bar will light up - half power
of heating. To turn on full power, press the
and buttons
seconds. Two bars will light up - full heating
power.
Operating modes and functions
There are 3 temperature operating modes
available for adjustment:
Comfort - range from 10 ºC to 35 ºC. Eco -
deviation range from Comfort from 3 ºC to
7 ºC. Anti-Frost - a range from 3 ºC to 7 ºC.
Control the target heating
temperature
3
• To increase the target temperature value,
use the button
• To decrease the target temperature value
4
use the button
Switching step is 1 degree.
"Open window" function
When this function is active, when the
temperature drops within 10 minutes (and then
up to 30 minutes) by 5 or more degrees -
the Anti-Frost mode is switched on the heater.
If in the time interval 10 - 30 minutes the
temperature continues to drop, the device
turns off. Further, the heater waits for the
stabilization of the decrease in the room
temperature, if it rises by 2 degrees, then
the last set mode is turned on.
To activate/deactivate the control panel lock
of the control panel, press the
"Parental control" function
To activate/deactivate the control panel lock
of the control panel, press the buttons
for 12 seconds at the same time.
and simultaneously for
and simultaneously for 2
.
and