3.5.2
Front view of the CPU without front panel or display and view from below
The following figure shows the operator controls and connection elements of the
CPU 1515‑2 PN.
①
②
③
④
⑤
⑥
⑦
Figure 3-4 View of the CPU 1515‑2 PN (without front panel or display) - front
NOTE
Removing the display
Only remove the display if it is faulty.
You can find information on removing and replacing displays in the S7-1500, ET 200MP
system manual (http://support.automation.siemens.com/WW/view/en/59191792).
CPU 1515-2 PN (6ES7515-2AN03-0AB0)
Equipment Manual, 11/2022, A5E46416198-AC
LEDs for the current operating mode and diagnostic status of the CPU
Connector for the display
Arrow keys
LED displays for the PROFINET interface
STOP and RUN operating mode buttons
STOP-ACTIVE LED
Connector for the supply voltage
Product overview
3.5 Operating and display elements
27