Interface Connectors; Installation; Manual Configuration - D-Link DAP-2695 Quick Installation Manual

Interface Connectors

1 2 3
Figure 2: Rear Connectors
# Connector
Used for rebooting or resetting
1 Reset
the device back to factory default
settings.
Console
RJ-45 port to connect the RJ-45
2
Port
console cable for CLI management.
3 LAN2 Port Gigabit RJ-45 port for data.
LAN1(PoE)
Gigabit RJ-45 port for data and
4
Port
Power over Ethernet (PoE) power.
Power
Input for the power adapter.
5
Input
Table 2: Interface Description

Installation

The DAP-2695 can be powered using one of the
following two methods:
Using Power over Ethernet (PoE)
1. Use a standard Ethernet cable to connect
LAN port 1 on the DAP-2695 to a PoE
power source device such as a 802.3at PoE
switch or 802.3at PoE injector.
Using the Power Adapter (Optional)
1. Connect the power connector of the
adapter to the power input on the
DAP-2695 and plug the adapter into a
nearby power outlet.
2
4 5
Description
Configuration
Using Nuclias Connect
The DAP-2695 is designed to be managed
through Nuclias Connect. Refer to the Nuclias
Connect Manual for detailed configuration
instructions.

Manual Configuration

Note: D-Link recommends manually configuring
the device before mounting it. The management
computer, DHCP server and DAP-2695 must be
in the same subnet.
Use one of the following methods to access the
web user interface:
Connecting through Ethernet
1. Use an Ethernet cable to connect the
DAP-2695 to the management computer
or to the switch or router the management
computer is connected.
2. Manage the access point from a computer.
Enter dap2695.local in the address field
of your browser.
3. Log in to the administration user
interface. The default login information is
Username: admin
Password: admin
Connecting Wirelessly
1. Connect the management computer to
the default SSID of the DAP-2695, "dlink".
2. Manage the access point from a computer.
Enter dap2695.local in the address field
of your browser.
3. Log in to the administration user
interface. The default login information is
Username: admin
Password: admin
DAP-2695 Quick Installation Guide