Table of Contents
Advertisement
6.
Install the spark plug into the cylinder head, and
torque the plug to 27 N∙m (20 ft-lb).
7.
Install the spark-plug wire.
8.
Repeat steps
1
through
plug.
Adjusting the High/Low Idle
1.
Lift the cargo bed and secure it with the prop rod.
2.
At the throttle cable housing, loosen the forward
jam nut and tighten the rear jam nut to increase
the low idle
(Figure
1. Throttle cable housing
2. Jam nuts
3.
Test the high idle with a tachometer:
A.
Ensure that the shift lever is in the N
position.
B.
Start the engine.
C.
Fully press the accelerator pedal and
measure the engine speed with a
tachometer; the engine speed should be
between 3,650 to 3,750 rpm. If it is not, shut
off the engine and adjust the cable jam nuts.
Important:
Test with a tachometer to ensure that the
high idle is between 3,650 to 3,750 rpm.
4.
Lower and secure the cargo bed.
7
for the other spark
44).
Figure 44
3. Throttle lever
Do not lower the high idle.
g229954
EUTRAL
42
Advertisement
Table of Contents
