Table of Contents
Advertisement
Listening Formats
The analyzer meets all required IEEE-488.2 encoding syntax. The syntax is specified to be very flexible to allow a
maximum variety of controller's to utilize the analyzer remote interface. This flexibility also allows the analyzer
language to appear in a form that is more understandable to the reader.
The following list gives the syntax for a <Terminated Program Message>, which is the syntax accepted by the
analyzer as a Listener.
<Terminated Promam Message>
Space> ] "END
Message
Message Unit
Message Univ
<Command Message Unio
<Command Program Header>
<Program Data> } ]
[ <White Space>
<Mantissa>
[ + I - ] {cDigi~}.cDigi~{cDigi~}l
<Non-Single Quote Character> >
<Non-Double Quote Character> } "
<White Space Character> { <white Space Character, >
<White Snace Character>
is an ASCII-encoded character in the following range:
00 through 09 (hexadecimal)
l
l
Motorola Communications Analyzer
Programming Reference
<White Space> <program Data> { cProgram Data Separator>
<Alpha> { _
10
Advertisement
Table of Contents
