Table of Contents
Advertisement
10
en | Installation
6.
7.
8.
See also
–
4.2
Replacing the logo
An additional logo is included, vertical installation is shown.
To replace the logo, do the following:
1.
2.
3.
4.
2018.07 | 02 | F.01U.345.356
Install a 10-mm rated forged eyebolt (not included) into the safety point.
Suspend the subwoofer from the eyebolts using rated fittings and steel cable.
Secure the subwoofer from the safety eyebolt using rated fittings and steel cable.
Replacing the logo, page 10
Remove the existing logo.
Clean the surface with alcohol.
Align the square guide on the rear of the logo with the square guide on the grille.
This view is showing the grille and the logo from the rear.
Remove the paper backing.
Installation manual
LB20 Premium Subwoofer
Bosch Security Systems B.V.
Advertisement
Table of Contents
