Husqvarna V554 Operator's Manual page 16

Maintenance
Clean the air intake of the
engine.
Clean the air intake of the
2
engine.
Clean the bottom side of the
cutting deck.
Clean around the engine.
Clean around the belts and
the belt pulleys.
Do a check of the belts and
the belt pulleys.
Clean the foam pre-filter.
Clean the paper filter car-
4
tridge.
Examine the muffler and
spark arrestor screen.
Start the engine and blades
and listen for unusual
sounds.
5
Sharpen the blades.
Replace the blades.
Replace the spark plugs.
Replace the engine oil.
Replace the engine oil filter.
Replace the fuel filter.
Replace the paper air filter.
Replace the hydraulic oil
and the hydraulic oil filter.
Disassemble and examine
8
the starter.
Do the 500-hour servicing.
2
In conditions with dust, cleaning and replacement must be done more frequently.
3
In conditions with dust, cleaning and replacement must be done more frequently.
4
In conditions with dust, cleaning and replacement must be done more frequently.
5
Must be done by approved service agent.
6
Replace the engine oil after the first 8-10 hours of operation. During heavy load or high ambient
temperatures, replace the engine oil each 50 hours.
7
In conditions with dust, cleaning and replacement must be done more frequently.
8
Must be done by approved service agent.
9
Must be done by approved service agent.
16
Daily maintenance
Before
3
6
7
9
Do mainte-
nance at a
minimum of 1
After
time each
year
*
O
X
*
*
X
O
O
*
*
X
X
O
O
O
O
O
X
*
Maintenance interval in hours
50 250
O O
X X
* *
* *
X
O
O
* *
X X
X X
O
O
O
O
O
X
1995 - 002 - 05.12.2022
500
O
X
*
*
*
X
X
X
*
*