Adjusting The Image Position And Clock (Automatic Adjustment); Manual Adjustment Of Screen Position And Clock - Pioneer Elite PRO-1000HD Operating Instructions Manual

Display Panel Adjustments
Adjusting the Image Position and
Clock (Automatic Adjustment)
Pressing AUTO SET UP on either the main unit operating
panel or the remote control unit will adjust the screen
position and clock to optimum values.
Notes
÷ This adjustment is supported only when a computer signal is
input.
÷ Perform this adjustment individually for each input function
(INPUT1 or INPUT2), and each signal type.
AUTO
SET UP
AUTO SET UP
Main Unit Operating
Panel
Press AUTO SET UP on either the main unit operating
panel or remote control unit.
÷ Optimum settings may not be possible for low-
luminance and certain other kinds of signals. In this
case, following the instructions in the following section

"Manual Adjustment of Screen Position and Clock"

to make more precise adjustments.
26
PRO-1000HD / PRO-800HD
S-VIDEO VIDEO
Remote Control Unit
Manual Adjustment of Screen
Position and Clock
This setting can be adjusted when a computer signal is
input. (The settings on this page are not supported when
a signal is input from a connected video component.)
Note
Make these adjustments for each input (INPUT1 to INPUT2) and
signals.
SCREEN mode adjustment items
Below are brief descriptions of the options that can be set
in the SCREEN mode.
POSITION
H.POSITION ·········· Adjust the picture's position to the
left or right.
V.POSITION ·········· Adjust the picture's position upward
or downward.
CLOCK/PHASE
CLOCK. ················· Adjust letter breakup or noise on the
screen. This setting adjusts the
unit's internal clock signal
frequency that corresponds to the
input video signal.
PHASE ·················· Adjust so that there is minimum
flicker of screen letters or color
misalignment. This setting adjusts
the phase of the internal clock
signal adjusted by the CLOCK
setting.
1
Press MENU to display the menu screen.
MAIN MENU
PICTURE SCREEN
:
CO NT RA S T 0
:
BR I GHT . 0
: 6
+
R L E V E L . 0
: 6 0
+
G L E V E L .
: 6 0
+
B L E V E L .
:
H E NH AN CE . 0
:
V E NH AN CE . 0
R S E T E
SELECT
SET
2 Press 2/3 to select SCREEN.
MAIN MENU
PICTURE SCREEN
:
P O S I T I O N
:
CL OC K / P HA S E
R S E T E
SELECT
SET
INPUT1
SET UP OPTION
ENTER EXIT
MENU
INPUT1
SET UP OPTION
0 / 0
0 / 0
ENTER EXIT
MENU