Fujitsu WSYA050ML3 Design & Technical Manual page 71

Line Access
I
• Off: Early interruption of the current program, program inactive
• Operational heating
• Heating ready for occupation
850
• Operational heating + ready heating
• Ready heating + Operational heating
• Manual: Manual mode enables you to program your own concrete slab drying time.
The function ends automatically after 25 days.
I
851
This function enables you to set the custom concrete slab drying temperature. This temperature
remains fixed. The concrete slab drying program stops automatically after running for 25 days.
856 I
857 I
S
900
Operating mode at the end of concrete slab drying period.
3-4. Heating circuit 1 and 2 functions
Function
Floor curing function
Floor curing setpoint
manually
Floor curing day current
Floor curing days completed 0...32
Operating mode changeover
Setting range or display
0...95°C
0...32
None, Protection mode,
Reduced, Comfort,
Automatic
- (03-13) -
Setting Factory
increment setting
Off
1°C 25°C
1 Reduced
3. Function table